readme

Aviable FSB settings:

	100.9 / 100.9 MHz
	107 / 107 MHz
	110 / 110 MHz
	112 / 112 MHz
	124 / 124 MHz
	133.9 / 133.9 MHz
	137.33 / 137.33 MHz
	100 / 133 MHz
	133 / 100 MHz
	133 / 166 MHz
	166 / 125 MHz*
	143 / 143 MHz
	147 / 147 MHz
	150 / 150 MHz
	166 / 166 MHz*
	200 / 200 MHz*


	* not bootable due a PLL chip issue but can be used with software tools after booting at a lower FSB.



Extra memory settings:

	RAS Active Time: 4T,5T
	RAS Precharge Time: 2T




*Other settings:*

IO APIC:	Gives you 23 IRQs in Win2k/XP if enabled.
	(You will have to change the ACPI HAL to the Uniprozessor HAL in your device manager or reinstall the OS to get 23 IRQ´s after enabling this option. It´s not required to do this if this option is enabled and you do not want to have the 23 IRQs but still share them. Just leave then the default APIC HAL.)

PCI IDE Busmaster:	Speeds up boot up time and restoring partions. Disable it in case you have troubles with older HD´s.

Offboard PCI IDE Card:	You can configure which slot and INT line it uses.

IRQ priority:	You can try to chance the IRQ priority for each INT line but will have to disable PnP and ACPI.

PCI Latency:	default 64 clocks

	Small K7S5A problem FAQ:
	==================================================

Q:	I flashed to the oc bios and am now having problems so what is wrong with it?

A:	Should you experience some problems with an oc bios please check first if you are getting them with the official too but before checking this please clear the Cmos to see if some old Cmos settings from the previous BIOS are interfering with some new bios settings.
	--------------------------------------------------------------------------------------------

Q:	I never flashed a bios before. Is there a flashing guide?

A:	Yes there is one. http://pub65.ezboard.com/fk7s5amotherboardforumfrm6.showMessage?topicID=32.topic
	--------------------------------------------------------------------------------------------

Q:	There are 2 files. One with "f" and one without it. I have a Lan board so which one should I use?

A:	Both files do autodetect Lan and non Lan boards so it doesn´t matter which one you flash. The one with the "f" is with FastWrites enabled.
	--------------------------------------------------------------------------------------------

Q:	I loose my Cmos frequently, have Memory misdetection or am getting a blank screen at coldboots. Is there a possible fix for this?

A:	Yes, you can try an other BIOS release or apply Mr.Athlons resistor fix if no BIOS will help you. For more details and how to improve it read here:
	http://pub65.ezboard.com/fk7s5amotherboardforumfrm10.showMessage?topicID=567.topic
	Worked for a lot of people who couldn´t fix it with an other BIOS release. There is a BIOS (021029tsd) that adresses this issue but it´s only fake. Just a renamed 021029 bios that was released before.
	--------------------------------------------------------------------------------------------
Q:	I did the resistor fix but the issue persist. Does it mean this fix doesn´t work for me?

A:	Maybe it doesn´t work for you but it could be also just a weak battery or a corroded battery holder.
	--------------------------------------------------------------------------------------------
Q:	NO multiplier adjustment,CPU core or Ram voltage settings?

A:	Right. No jumper/bios multiplier adjustment, no jumper/bios CPU voltage and no jumper/bios Ram voltage adjustment.
	The only way to change the multiplier or vcore is by modding the board or modding the CPU. Ram voltage can only be changed by modding the board. The lock/unlock state of the chip is ignored by the board hardware. Therefore there is no BIOS that can support such adjustments.
	--------------------------------------------------------------------------------------------

Q:	Is there a problem by using 2 sticks SDRAM at 133Mhz and can it be fixed?

A:	Yes there is one. This Mobo is known to freeze a lot or beeing unstable for a lot of people who use 2 sticks and there is no magic fix for this because it´s due a voltage drop by using 2 sticks and on some boards this drop is to high to get them working stable.. You can use only one stick SDRAM, move over to DDRAM, try to run at 138Mhz or stay at 100Mhz. The 138Mhz setting works somehow for some people but no idea why. Maybe due a higher power consumation their PSU´s are giving higher voltages.
	--------------------------------------------------------------------------------------------

Q:	Can I change the chipset registers and is there a PCR file aviable?

A:	Yes you can. The PCR file can be downloaded for example from here: http://www.fortunecity.de/kunterbunt/pfalz/102/downloads/735.zip
	--------------------------------------------------------------------------------------------

Q:	Where does the PCR file come from?

A:	Take a look here: http://pub65.ezboard.com/fk7s5amotherboardforumfrm6.showMessage?topicID=76.topic
	--------------------------------------------------------------------------------------------

Q:	What is a chipset heatsink fix and do I need it?

A:	If you are suffering by some stability problems then you can try it. Costs nothing and will incrase your stability anyway. Read the full description about the imprtance of this fix written by Oken: http://pub65.ezboard.com/fk7s5amotherboardforumfrm5.showMessage?topicID=261.topic
	--------------------------------------------------------------------------------------------

Q:	Who got the idea to cool the chipset, did the first K7S5A´s have the same problem?

A:	The first K7S5A´s did have the same issue but most people didn´t belive it´s releated to the chipsets heat but finally there were at least a few that could imagine that to be the problem. You might find the answer here: http://pub65.ezboard.com/fk7s5amotherboardforumfrm10.showMessage?topicID=30.topic
	--------------------------------------------------------------------------------------------

Q:	Most of the suggested solutions here are the same like at the ocworkbench forum. Does it mean there are the real modders and the solutions in the ezboard are just stolen?

A:	NO! All modders in the ezboard were previously members at ocworkbench who were banned one day. Nearly all solutions at ocworkbench are taken from these banned people. The resistor fix for example and the banned people are not allowed to be mentioned there. You can try to mention them if you want to risk to be banned too.
	--------------------------------------------------------------------------------------------

Update: There is also a OC1209 Bios aviable, basing on the 021209 Pro Bios which Cheepoman never modded.

Also, the same people are saying it´s way slower than his one. Well, this BIOS is tweaked with stability in mind and not performance but the measured differences are within 3-5% where sometimes his is a bit faster and sometimes this one.

I can´t tell you which one you should prefer but I prefer stability with good performance. That´s the reason why I am modding the BIOS. I just can´t accept that my system crashes after a few hours of editing my captured videotapes and am loosing all I worked for in this time.

At least, should you still have some troubles with this BIOS which are not caused by the modifications itself, flash to 020429 (proven to be best working until now) and if there are troubles caused by the modifications which do not appear with the official one please report back so I can narrow them down but check before with the official one if the problem persists or not.

http://pub65.ezboard.com/fk7s5amotherboardforumfrm6
Errors are human...:)

Honey.